habitat et jardin 1318 100092, Manual

Page: 9 / 12

Model
EN
This Manual applies to all direct charged LED Table Lamp Speaker:
Specification
Our LED Table Lamp Speaker is manufactured to an international standard (IP44) to protect against dust and water.
This means that they can be used outdoor, but not near or in pools, provided that they are used in accordance with
this Instruction Manual. This product is made of white polyethylene.
Warnings and Cautions
1. These products and their packaging are not toys, please keep out of reach of children.
 The remote control and USB cable are not waterproof and must be kept in a dry location at all times.
 Never charge the product in a pool, water or rain, charge in a dry, indoor location.

This product is not designed to be used in pools or ponds.
 Disconnect the charger when not in use.
 Do not stand, or jump on this product.
 Do not sit on this product if it is cracked or damaged.
8. Keep the product away from chemicals and heat.
9. Do not attempt to open the product and its accessories.
10. Do not put under direct sunlight all the time when not in use.
11. Do not attempt to open the product,if open it by consumer themselves,product will be out of after-sale service.
Operation
Charging your new Product
Charge the product for 6 to 8 hours before using as below steps:
1. Use a adaptor with output 5V 2A Max to connect USB plug for charging,the “DC Charging port”as shown in photo 1.
2. The “Charging indicator light” shown in photo 1 will turn red to indicate that charging is working and turn to green to
indicate that it’s fully charged.

Ambient temperature for operation:
-14˚ C to 35˚C
 LED
12xPCS RGB
LED

Battery: Lithium Battery (1x3.7V, 2000MAH )
 Remote control battery: CR2025 (3V)

Remote control effective distance:
4-8 meters
 Charging time: Around 6 to 8 hours
 Operation time:
Around 4 to 6 hours depends on lighting brightness
and sound volume

USB Charging: Input for product: 5V 2A Max
(Not including Adaptor)