habitat et jardin 1318 100092, Manual

Page: 11 / 12

After turning on the speaker and activating the Bluetooth function, activate the Bluetooth function on your mobile
device and select “Table Lamp Speaker” in the Bluetooth device list (depending on the Bluetooth version of your
device, you may have to enter the pass code ”0000”).
Notice: This LED Table Lamp Speaker has a memory storage function (if the battery inside product are not fully
exhausted) so that when you turn off the product,it can remember current color mode and then can stay the same
color mode if you turn it on again.
If the battery is exhausted there will be no memory storage function and it will revert to the default “ Smooth ” setting.
Mode Selection by Remote Control
Before using the remote control remove the small plastic sheet from the battery cover.
Please return this plastic sheet to remote control when not using to save battery power.
Notice: Each time you need to turn on product before activating remote control function.
Photo 2
1&2: Brightness intensity button: Change brightness intensity when the light is fixed on one single color.
3: Light ON/OFF button: Press this button to power the light on and off.
4: Press this button to turn on and turn off Bluetooth,when the Bluetooth is on, a voice will come out.
5&6&7&9&10&11&12: Color selection button .When the light is on Press this button to choose your favorite color as
shows on remote control (Seven colors).