Install Guide
Unpack all package contents and inspect
each component. Make sure all included
parts and accessories are present.
Step 1 - Inspect Contents
Using a phillips head screw driver, remove
the four screws on the sides of the enclosure.
Step 2 - Remove Top Cover
Align notch in memory circuit with
corresponding guide on the memory slot.
Insert the memory circut at a 45° angle and
press the circuit flat and secure it to the
memory slot with an audible click on each
side of the memory slot.
Step 3 - Install RAM
Step 4 - Install 2.5” HDD
Mount the HDD onto the bracket and then fix
it with 4 screws.
