HABCO® TECHNICAL DOCUMENT - C098791 • 10310209
© HABCO Manufacturing Inc. “HABCO, Cassette, Cold Space Merchandiser” are registered trademarks of HABCO Manufacturing Inc. Domestic and International Patents.
Page 6
F. LIGHTING
WARNING: RISK OF DEATH, FIRE, EXPLOSION, ELECTRICAL SHOCK AND/OR
OTHER PERSONAL INJURY!
DO NOT ACCESS MECHANICALLY FASTENED AREAS WITHOUT PERMIS-
SION OF OWNER AND READING AND UNDERSTANDING PRODUCT
MANUAL.
DISCONNECT POWER BEFORE ACCESSING MECHANICALLY FASTENED
AREAS.
MAINTENANCE AND REPLACEMENT OF LED LIGHT STRIPS AND RELAT-
ED DRIVER COMPONENTS TO BE PERFORMED BY A QUALIFIED
TECHNICIAN ONLY.
•
Solid door models’ lights are actuated automatically when door(s)
are opened.
•
SE18/24/28 model Light Switch is located on the right front face of
the horizontal lighting assembly, as you face the appliance. Switch
controls both sign and interior on SE18M and SE24M.
•
SE42/46 model Light Switch is located at the rear top of the center
post above the lighting array.
G. CASSETTE® ACCESS & REMOVAL FOR STANDARD MAINTENANCE
WARNING: RISK OF DEATH, FIRE, EXPLOSION, ELECTRICAL SHOCK AND/OR
OTHER PERSONAL INJURY!
DO NOT ACCESS MECHANICALLY FASTENED AREAS WITHOUT PERMIS-
SION OF OWNER AND READING AND UNDERSTANDING PRODUCT
MANUAL.
DISCONNECT POWER BEFORE ACCESSING MECHANICALLY FASTENED
AREAS.
INSPECT POWER CORD FOR ANY DAMAGE PRIOR TO POWERING AND
WHENEVER HABCO® CASSETTE® IS EXCHANGED OR APPLIANCE IS MOVED.
DO NOT PLUG THIS APPLIANCE INTO WALL RECEPTACLE IF POWER
CORD IS DAMAGED.
DO NOT ACCESS MECHANICALLY FASTENED AREAS WITHOUT PERMIS-
SION OF OWNER AND READING AND UNDERSTANDING PRODUCT
MANUAL.
DISCONNECT POWER BEFORE ACCESSING MECHANICALLY FASTENED
AREAS.
DANGER:
RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIG-
ERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PER-
SONNEL. DO NOT USE MECHANICAL DEVICES TO DEFROST RE-
FRIGERATOR. DO NOT PUNCTURE REFRIGERANT TUBING. R290
REFRIGERATION SYSTEM (CASSETTE) SHOULD ONLY BE USED IN
A HABCO UNIT THAT IS DESIGNED AND APPROVED FOR R290.
R290 Service Manual, available from HABCO Manufacturing Inc.
WARNING: RISK OF PERSONAL INJURY!
EMPLOY BEST HEALTH AND SAFETY LIFTING PRACTICES WHEN REMOV-
ING SHIPPING PLATFORM(S); LEVELING CABINET; REVERSING DOORS; AND
MOVING APPLIANCE. IF IN DOUBT, ASK FOR HELP.
USE CARE WHEN HANDLING OR CLEANING METAL PARTS.
1. To access single door Cassette® loosen two bolts located on the
lower kick plate of the air flow grill (Fig G1).
FIG. G1
FIG. G1
2. Then remove two screws located in flange at the top of air flow
grill. Grill will lift up and off the bottom screws (Fig G1) Gently
move grill away from front face of cabinet ensuring that you do
not pull wiring attached to digital controller (Fig G2). Swing grill
vertically upward and rest at left hand side of cabinet.
FIG. G2
FIG. G2
i.
Double Door Added Step
Double Door Cassette® models feature added support in
the form of a bracket located between the Cassette® base
and the Cassette® chamber ceiling. To remove the Cas-
sette® from these models completely remove upper fasten-
ing screws, and slide Cassette® out of cabinet. Bracket will
remain affixed to Cassette® (Fig G3).
FIG. G3
FIG. G3
Summary of Contents for SE40eHC
Page 2: ......
