HABCO® TECHNICAL DOCUMENT - C096832 • 10126169
© HABCO Manufacturing Inc. “HABCO®, Cassette®, Cold Space Merchandiser®” are registered trademarks of HABCO Manufacturing Inc. Domestic and International Patents. Page 2
HABCO® COMMERCIAL REFRIGERATORS-CASSETTE®
SAFETY, INSTALLATION AND INSTRUCTION MANUAL
CABINET MODELS: SE18, SE24, SE28, SE42, SE46
HABCO Management Systems are Certified to ISO 9001-2008.
LANGUAGE: Translation of this document is completed with the utmost care,
utilizing the resources of an ISO 9001 Certified Translation firm. In rare instanc-
es where translation is imperfect or imprecise, the parent English document
will take precedence.
IMPROPER OR UNSAFE use of this appliance other than intended by
the manufacturer, can result in death, serious bodily injury, property
damage and/or appliance damage!
This manual contains important information about product safety.
Read and understand this manual BEFORE operating the appliance.
Please keep this manual available for other users and owners before
they use the appliance. Store this manual in a secure location.
WARNING
INTENDED USE
HABCO® Commercial Refrigerators are designed for the commercial re-
frigerated storage and display. Not intended for use in outdoor, direct
sun, damp, extreme heat and/or cold conditions.
MEANINGS OF SIGNAL WORDS AND SYMBOLS
WARNING
indicates potentially hazardous situations which,
if ignored, could result in death or serious injury.
WARNING
indicates potentially hazardous situations which,
if not avoided, may result in minor or moderate injury.
NOTICE
emphasizes essential information or that which may
cause appliance damage or environmental harm.
Table of Contents
Section
Subject
Page
INFORMATION AND TABLE OF CONTENTS ......................
2
SAFETY.............................................................................
3
A.
INSPECTION & UNPACKING ............................................
4
B.
LOCATION ........................................................................
4
C.
ELECTRICAL ......................................................................
4
D.
START-UP .........................................................................
5
E.
THERMOSTAT LOCATION & ADJUSTMENT .......................
5
F.
LIGHTING .........................................................................
6
G.
CASSETTE® ACCESS & REMOVAL .....................................
6
H.
DOORS .............................................................................
7
Easy Mount Swing Door Reversal ....................................
7
Sliding Door Removal and Adjustment ............................
8
I.
PREVENTATIVE MAINTENANCE .....................................
10
J.
CLEANING PROCEDURES ...............................................
11
K.
TROUBLE-SHOOTING .....................................................
12
ENERGY EFFICIENCY TIPS
HABCO® C
ommercial Refrigerators bearing the ENERGY STAR® logo are
manufactured and designed to perform within the most stringent en-
ergy efficiency guidelines. The following energy efficiency tips, however,
pertain to all commercial refrigerators and should be followed for best
energy efficiency results.
1.
Maintain a clean condenser coil.
2.
Turn off lighting when not in use.
3.
Maintain clean door seals and ensure bottom door guide is
clear of debris at all times.
4.
Do not install in direct vicinity of high heat sources such as
heating vents, baseboard heaters, ranges, and ovens.
5.
Do not install directly beneath undiffused air conditioning
vents.
6.
Read, understand and observe Safety Warnings and Notices
in this manual as many of these points will also contribute
to energy savings and appliance efficiency.
Glossary
Term
Explanation/Alternate Term
Commercial Refrigerator
Appliance
Cassette®
Self-Contained, Removable Refrigeration Package
Compressor
Refrigerant Compressing Motor Mounted to Front of Cassette®
Evaporator (Coil)
Cooling Coil Mounted to Rear of Cassette®
Finned, Condenser (Coil)
Vertical Finned Heat-Exchange Coil Mounted to Front of Cassette®
Free&Clear™, Finless Condenser (Coil)
Finless, Circular Formed Heat Exchange Coil Mounted to Front of Cassette®
Cassette® Chamber
Refrigeration Enclosure
Evaporator Chamber
Cooling Coil Enclosure Located within Cassette® Chamber
Mechanically Fastened Areas
Areas Requiring a Tool to Access
Trained Professional
Trained Refrigeration and/or Electrical Contractor
Owner
Person or Company Holding Legal Title to Appliance
Header
Upper Front Metal Panel
