Operating instructions 36008
Hot-pressing device
PT-50
Page 8 of
16
Edition: 01/0409
Subject to alterations
5.3
Remedial action in the case of a temperature deviation
WARNING
All work on the hot-pressing device involving electrical parts has to be carried out
by the respective specialists only.
Observe your local laws about required training of such personnel.
If the temperature deviates from a maximum value of 130 °C /
266 °F
or a minimum value of 100 °C /
202 °F
,
the heating element is defective and must be replaced.
5.4
Replacement of the power cord
Check power cord periodically. In case of damage, replace with the same type (H05-RNF).
WARNING
All work on the hot-pressing device involving electrical parts has to be carried out
by the respective specialists only.
Observe your local laws about required training of such personnel.
