Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author:
S.D.T. / KM
INSTALLATION
Edition: 02/2005
Page
C-6
Replaces: 01/2001
C.4
Equipment disassembly
Skiving device dismantling operations must be performed by:
Technicians of HABASIT Assistance Service.
Technicians authorized by HABASIT, with experience of: Machine assembly/disassembly,
assembly/disassembly of the electrical, pneumatic and hydraulic plant, consulting the corresponding
diagrams.
ATTENTION
BEFORE CARRYING OUT ANY KIND OF WORK ON THE SKIVING DEVICE IT IS ESSENTIAL TO
ENSURE THAT THE SYSTEMS ARE DISCONNECTED FROM ENERGY SUPPLIES AND THAT
THERE IS NO REMAINING POTENTIAL ENERGY IN THE MOVING PARTS.
ATTENTION
Follow the following disconnection procedure:
Disconnect the electrical circuit.
Carry out mechanical disassembly.
If the skiving device has to be stored for a certain time, prepare it as indicated in the next section, but if it
has to be handled immediately, refer to the appropriate section.
Skiving device AT-306
