14
2
1
8.5.
Cleaning the pellet container - annual
maintenance
Heat the pellet stove until the storage tank is completely
empty. Then the protective grille (1) in the pellet tank
may be removed. Then clean the tank and the intake of
the screw conveyor housing with a vacuum cleaner.
After cleaning, it is essential to put back the protective
grille. When doing this, make sure that no screws fall
into the pellet tank so as to avoid consequential damage
to the screw conveyor.
Figure 7: Pellet tank
Protective grille (1)
Tank cover (2)
8.6.
Cleaning the flue gas passes - annual
maintenance
First pull the stove away from the wall so as to create
enough room to work at the back.
To clean the flue gas passes, proceed as follows:
Disconnect the flue baffle (1) from the guide by lifting it.
Draw the right cladding (2) down out of the guide and
place it down in the ash space. Then the flue baffle can
be removed and the upper part of the combustion
chamber can be cleaned. (See Figure 8a).
Figure 8a:
Removing the flue baffle
Then remove the right side wall. This is fixed with
screws (1) at the back and at the front with 3 connectors.
Remove the screws from the back and pull the side wall
off sideways. (See Figure 8b+8C).
1
3x
