background image

7

Before Using Your Floor Sanitizer

Be sure to read ALL instructions and warnings 

before

 using 

your Floor Sanitizer.

1. 

Handle

2. 

Steam

 

Power Switch

3. 

Power Indicator Light

4. 

Floor Steamer Body

5. 

Grip Handle

6. 

Storage Hook (rotates 360º)

7. 

Power Cord Organizer (bottom)

8. 

Main Body

 

Assembly Screw

9. 

Handheld Unit Release Buttons

10. 

Power Cord

11. 

Water Tank Release Button

12. 

Detachable Water Tank

13. 

Handheld Steamer Body

14. 

Handheld Unit (detached)

15. 

Angled Nozzle Attachment

16.

 

Brush Attachment

17.

 

Small Steam Head Attachment

18.

 

Small Steam Head Pad

19.

 

Assembly Screw (x1) 

Located in Accessory Bag

20.

 

Floor Protector / Resting Mat

21.

 

Carpet Glide

22.

 

Ultra-Microfiber Pads (x2)

23. 

Fresh Rinse Lime & Scale Remover (x12)

24. 

Extended Flexible Hose

25. 

Handheld Unit Shoulder Strap

26. 

Shoulder Strap Connection Loops

27. 

Steam Level Button

Helpful Hint:

To extend the life of your 
Ultra-Microfiber Pads, 
always place your unit on 
the floor protector/resting 
mat while the unit heats 
up. Attach the Ultra-Micro-
fiber pad when the unit is 
ready to use.

 

Helpful Hint:

Helpful Hint:

When heated, never leave the ap-
pliance in one spot on any surface 
for any period of time.  Always 
place your Floor Sanitizer on the 
Floor Protector/Resting Mat when 
stationary.

Always empty water from water 
tank after use.  To ensure opti-
mum product function use Fresh 
Rinse

 once a month.

 

Helpful Hint:

When using the Floor 
Sanitizer with the Carpet 
Glide it will not lift all set-in 
stains from your carpet. 
Our patented Ultra-mi-
crofiber pad may be used 
to act as a “blotter” for 
removing most fresh, wet 
spills and stains. 

 

Your floor sanitizer is designed to clean hard floor surfaces that will withstand high 
heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that 
have been treated with wax or some no-wax floors, the sheen may be removed by 
the heat and steam action. It is always recommended to test an isolated area of the 
surface to be cleaned before proceeding. We also recommend that you check the 
use and care instructions from the floor manufacturer.

WARNINg

Summary of Contents for Power & Finesse SI-75




















Reviews: