LENSTAR LS 900 / 900 APS
12
© HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02
Guide the cables through the cross slide as shown in image (15) and connect the supply and USB cable to the
LENSTAR. Secure the connectors and cables as shown in image (15) using standard cable binders. Make sure
that the flaps are not mounted downwards, as they may drag on the table otherwise.
Mount the cable channel cover using a 1.5mm hex key (16).
Mount the rail covers.
Pull the black tube through the cable guide (17).
Check that the motion of the LENSTAR is not hindered by the cabling (18).
Figure 15
Figure 16
Figure 17
Figure 18
Summary of Contents for LENSTAR LS 900
Page 15: ......
