LENSTAR LS 900 / 900 APS
© HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02
11
2.3.6
Device connection, cables at the side for LENSTAR LS 900 APS
Remove the rail covers.
Place the LENSTAR APS on the right side (seen form the joystick).
Remove the cable channel cover on the right side of the LENSTAR using a 1.5mm hex key (12).
Snap off the cable channel cover piece and smoothen the edge with a sharp knife (13).
Pull the two cables through the black tube (14) (1003686).
Figure 12
Figure 13
Figure 14
Summary of Contents for LENSTAR LS 900
Page 15: ......
