12
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220505‑04060 – 2021 – 08
• Insert the camera cable's connector plug (76) into the socket (85).
• Press the cable into the recess on the microscope arm (75).
• Feed computer cable USB 3.0 (73), power supply cable (72), and cable
headrest / LED illumination / RM02 (71) through the braided sleeving (70).
• Insert the connector plug of the power supply cable (72) into the socket (86).
• Insert the connector plug of the computer cable USB 3.0 (73) into the (87).
• Pull on the braided sleeving until taut and mount a cable tie (69) on each end.
• Mount a cable cover (91) on the threaded bolts (88) or mount the USB
connector screws.
• Connect the headrest cable (68) with its counterpart (67) on the headrest.
• Mount the table board and place the slit lamp on the table.
• Connect the computer cable USB 3.0 (73) to the PC.
• Connect the electric power supply lead (35) to the power supply (34).
• Connect the power supply connector plug to the mains.
• Plug the headrest cable (1) into the lamp head.
67. Connection plug headrest
68. Connector plug headrest / LED
illumination / RM02
69. Cable tie
70. Braided sleeving
71. Cable headrest / LED illumination /
RM02
72. Power supply cable
73. Computer cable USB 3.0
74. Camera (not shown)
75. Recess on the microscope arm
76. Connector plug camera cable
77. Release module RM02
78. RM02 operational control LED
79. On/Off key
80. Rotating knob, background
illumination
81. Rotating knob, slit illumination
82. Selector key A
83. Selector key B
84. Release key RM02
85. Socket camera cable
86. Socket for power supply connector
plug
87. Socket computer cable USB 3.0
micro B
88. Threaded bolt
89. Pin assignment without imaging
set
90. Pin assignment with imaging set
91. Cable cover
