User Manual
H3C XE 200/2000 IP PBX G-Remote
Chapter 2 GUI Server Configuration
2-3
By default, there are ten files in the flash:/web directory on the XE IP PBX: index.html,
zh_down.html, en_down.html, g-remote_ch.exe, g-remote_en.exe, banner.jpg,
zh_down.png, en.png, zh.png, and zh_describe.png.
Note:
z
The above mentioned xxx.xxx.xxx.xxx represents the IP address of the XE IP PBX,
and filename refers to the name of the file saved under the flash:/web directory on
the XE IP PBX.
z
After you modify or delete a file under the flash:/web directory, restart the Web
server so that your change can take effect. However, adding a file does not need the
restart-up.
z
Be careful to rename or delete files under the flash:/web directory. Improper
operations may cause failure of downloading GUI client software.
z
Click [XE G-Remote English Version] on the [XE G-Remote Download] Web page to
download the GUI client software.
Enable or disable the Web service as follows:
Table 2-4
Enable/disable the Web service
Operation
Command
Remarks
Enter system view
system-view
—
Enter GUI server configuration view
gui
—
Enable/disable the Web service
web
{
start
|
stop
}
Required
2.2.5 Configuring Self-service
With the self-service, a user can log on to the GUI server with the normal user account
and perform the following operations on one’s own account:
z
Querying account configurations.
z
Configuring services.
z
Changing the password.
A normal user can configure/query the following services on the GUI server:
z
Abbreviated dialing. Refer to
for configuration details.
z
Call forwarding services. Refer to
for configuration
details.
z
MyRing service. Refer to
for configuration details.
z
Do-not-disturb service. Refer to
for configuration details.
z
Alarm clock service. Refer to
for configuration details.
