H3C XE 200, User Manual, Page: 95 / 125

User Manual
H3C XE 200/2000 IP PBX G-Remote
Chapter 5 Call Service Configuration
5-31
Step
Configuration
task
Description Remarks
—
Configure
other call
services
Refer to Call Service Overview . Optional
Return to XE IP PBX Configuration Overview .
5.19 Time Announcement Service
5.19.1 Introduction to Time Announcement Service
With the time announcement service, a subscriber can dial the access number to the
XE IP PBX to query the current time. The time presented by the XE IP PBX is its current
system time.
5.19.2 Configuring Time Announcement Service
Table 5-26 Configure the time announcement service
Step
Configuration
task
Description Remarks
1
Enable/disable
the time
announcement
service for a
subscriber
Select [System View/Location
Server/Gateway/
the gateway where the
subscriber to be configured is
located
/Subscriber/ the subscriber to be
configured ] in the navigation tree, and
z
Select [Announce Time] in the
configuration window to enable the time
announcement service for the subscriber.
z
Clear this check box to disable the time
announcement service for the subscriber.
Command: srv-switch announce
(subscriber number view)
Required
—
Configure
other call
services
Refer to Call Service Overview . Optional
Return to XE IP PBX Configuration Overview .
5.20 MyRing Service
5.20.1 Introduction to MyRing Service
The MyRing service is use to set customized ringback tone for a subscriber, so that
when the subscriber is called, the caller will hear the customized ringback tone.