User Manual
H3C XE 200/2000 IP PBX G-Remote
Chapter 5 Call Service Configuration
5-10
5.5.3 Configuring Outgoing Call Authority Control Service
Table 5-7
Configure the outgoing call authority control service
Step
Configuration
task
Description
Remarks
1
Configure the
subscriber role
for a
subscriber
1)
Select [System View/Location
Server/Gateway/
the gateway where the
subscriber to be configured is
located
/Subscriber/
the subscriber to be
configured
] in the navigation tree.
2) Set the subscriber role correctly in the
configuration window.
Command:
subscriber-role
(outgoing call
authority control service view)
Required
2
Enable/disable
the outgoing
call authority
control service
for a
subscriber
Select [System View/Location
Server/Gateway/
the gateway where the
subscriber to be configured is
located
/Subscriber/
the subscriber to be
configured
] in the navigation tree, and
z
Select [Call Out Limit] in the configuration
window to enable the outgoing call
authority control service.
z
Clear this check box to disable the
outgoing call authority control service.
Command:
srv-switch cba
(subscriber
number view)
Required
—
Configure
other call
services
Return to
XE IP PBX Configuration Overview
.
5.6 Abbreviated Dialing Service
5.6.1 Introduction to Abbreviated Dialing Service
The abbreviated dialing service uses two-digit abbreviated numbers to replace
specified called numbers for easy dialing. To call a specified number, a subscriber only
needs to dial the corresponding two-digit abbreviated number.
