User Manual
H3C XE 200/2000 IP PBX G-Remote
Chapter 5 Call Service Configuration
5-26
5.13.2 Configuring Time Limit Call Service
Table 5-20
Configure the time limit call service
Step
Configuration
task
Description
Remarks
1
Enable/disable
the time limit
call service for
a subscriber
Select [System View/Location
Server/Gateway/
the gateway where the
subscriber to be configured is
located
/Subscriber/
the subscriber to be
configured
] in the navigation tree, and
z
Select [Call With Time Limit] in the
configuration window to enable the time
limit call service for the subscriber.
z
Clear this check box to disable the time
limit call service for the subscriber.
Command:
srv-switch limited-time-call
(subscriber number view)
Required
2
Configure the
time limit of the
limited calls
1) Select
[System
View/Location
Server/Gateway/
the gateway where the
subscriber to be configured is
located
/Subscriber/
the subscriber to be
configured
] in the navigation tree.
2) Set the time limit in the [The Max Time
Of Limited Call] text box in the
configuration window.
Command:
limited-call-time
(time limit call
service view)
Required
—
Configure the
default time
limit of limited
calls
1) Select [System View/Location Server] in
the navigation tree.
2) Set the default time limit in the [Default
Time Of Limited Call] text box in the
configuration window.
Command:
default-limit-call-time
(LS view)
Optional
—
Configure
other call
services
Refer to
. Optional
Return to
XE IP PBX Configuration Overview
.
5.14 Third Party Call Control Service
5.14.1 Introduction to Third Party Call Control Service
A third party, usually an administrator that has the corresponding authority, can preset a
call task on the XE IP PBX. The XE IP PBX will then invite the call participants (A and B)
to join the call at the preset time and to have a conversation. Two participants, namely,
parties A and B, are supported by the third party call control service.
