H3C WX6103, Installation Manual

Page: 75 / 90

67
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
================================================================================
Enter your choice(0-5):
File control submenu
You can change the application file type and name, and delete an application file in the file control
submenu.
Select
4 in the BootWare main menu to enter the file control submenu.
The following output is displayed on the EWPX1WCMB0:
===============================<File CONTROL>=============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Set Configuration File type |
|<4> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
The following output is displayed on the EWPX1WCMD0:
=================================<File CONTROL>=================================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-3):
NOTE:
The default configuration file type of the EWPX1WCMB0 is N/A. You cannot change the file type.
BootWare operation submenu
You can back up, restore, and upgrade the BootWare in the BootWare operation submenu.
Select
7 in the BootWare main menu to enter the BootWare operation submenu:
===========================<BootWare Operation Menu>============================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
================================================================================
Enter your choice(0-4):