8
Figure 1 Setting up the upgrade environment
Procedure
1.
Configure AP settings on the AC:
# Create a manual AP named
WA6320
and set the AP model to
WA6320
.
<Sysname> system-view
[Sysname] wlan ap wa6320 model WA6320
# Specify the serial number of the AP.
[Sysname-wlan-ap-wa6320] serial-id 219801A1NN8169E16844
[Sysname-wlan-ap-wa6320] quit
2.
Configure DHCP on the AC:
# Enable DHCP.
[Sysname] dhcp enable
# Create a DHCP address pool and enter its view.
[Sysname] dhcp server ip-pool dhcp1601
# Assign an IP subnet for the DHCP address pool for dynamic address allocation.
[Sysname-dhcp-pool-dhcp1601] network 160.1.1.0 mask 255.255.255.0
[Sysname-dhcp-pool-dhcp1601] quit
The AP automatically establishes a CAPWAP tunnel with the AC, and then loads the software
image from the AC. You can execute the
display wlan ap name wa6320
command to verify
that the AP is downloading the software image.
<Sysname> display wlan ap all
Total number of aps: 1
Total number of connected aps: 0
Total number of connected configured aps: 0
Total number of connected auto aps: 0
Total number of connected anchor aps: 0
Maximum ap capacity: 512
Remaining ap capacity: 512
Maximum ap license: 0
Remaining ap license: 0
AC
AP
PC
Ethernet Cable
