H3C WA6126, Manual

Page: 13 / 17

10
Connecting the AP to a power source
You can supply power to the AP by using a local power source or through PoE as required. Before
powering the AP, make sure the local power source or the power sourcing equipment (PSE) is
reliably grounded.
Connecting a PoE power source
To power the AP through PoE, use an Ethernet cable to connect an Ethernet port on a PoE switch to
the GE port on the AP.
Connecting a local power source
You can use an AC/DC power adapter to connect the AP to a local power source. No power adapter
is provided with the AP. Purchase a power adapter from H3C as required.
Table 2 describes the
power adapter specifications.
Table 2 Power adapter specifications
Item Specification
Input 100 VAC to 240 VAC
Output
+48 VDC to +55 VDC
Figure 24 Using a power adapter to connect the AP to a local power source
Check after power-on
Examine the LEDs on the AP after you power on it to verify that the AP is operating correctly. For
more information about the LEDs, see ports and LEDs in
Hardware Information and Specifications .