2-8
Check after power-on
Examine the LEDs on the AP after you power on it to verify that the AP is operating correctly. For
more information about AP LEDs, see "
Connecting the AP to the network
Connect the Ethernet ports on the AP to an Ethernet switch and verify network connectivity.
Verifying network connectivity when the AP operates as a fit
AP
All AP settings are configured on the AC when the AP operates as a fit AP. Execute the
display
wlan ap all
command on the AC. If the AP status is
R/M
, the AP has been connected to the
network.
<AC> display wlan ap all
Total number of APs: 1
Total number of connected APs: 1
Total number of connected manual APs: 1
Total number of connected auto APs: 0
Total number of connected common APs: 1
Total number of connected WTUs: 0
Total number of inside APs: 0
Maximum supported APs: 3072
Remaining APs: 3071
Total AP licenses: 128
Remaining AP licenses: 127
Sync AP licenses: 0
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run M = Master, B = Backup
AP name AP ID State Model Serial ID
ap1 1 R/M WA5320 219801A0YD8166E00000
Verifying network connectivity when the AP operates as a
cloud-managed AP
The WA5320 AP can operate as a cloud-managed AP. When the AP operates in cloud-managed AP
mode, use a wireless client that connects to the AP to access the network. If the AP can access the
network, the AP has been connected to the network.