H3C WA4320H-ACN, Installation Manual

Page: 10 / 21

4
Installing the AP
Figure 1 Installation flowchart
Check before installation
Before installing an AP, perform the following tasks:
• Connect the AP to the power supply and the network. Examine the LEDs to verify that the AP can
operate correctly. For more information about AP LEDs, see “ Appendix LEDs and ports .”
•
Verify that cabling on the installation site has been completed.
• To ensure the PoE performance, H3C recommends that you use GE interfaces for PoE power supply.
•
Record the AP MAC address and serial number marked on the rear of the AP for future use.
Installing the AP
1. Use the M3.5 × 25 screws to secure the wall-mounting bracket to the terminal box.