H3C WA2620-AGN, Quick Start Manual

Page: 23 / 45

2-9
Power over Ethernet (PoE) from the LAN
To power the AP using PoE provided by a switch or other 802.3af
compliant device, plug the network cable from the device into the
AP’s Ethernet port.
Power over Ethernet from a PoE Injector
To power the AP using a PoE injector or midspan (not included),
follow these steps:
1) Connect the LAN cable from a switch to the Switch port on the
PoE injector.
2) Connect a LAN cable from the Ethernet port on the AP to the other
LAN port on the PoE injector.
3) Plug the PoE injector into a properly grounded electric outlet. See
the illustration.