2-3
Wall or Electrical Box Mounting
To install your AP on a wall or electrical box, use the mounting bracket
that comes with the device. Follow these steps:
1) Following these guidelines, screw the mounting bracket to a wall
or electrical box (NEMA enclosure):
z
The mounting bracket tabs should be pointing upward.
z
If mounting to drywall, use the 4 screws and 4 wall anchors.
z
If mounting to an EU electrical box (60.3mm), use 2 threaded screws
and insert into the holes marked “A” in the diagram shown below.
z
If mounting to a US electrical box (83.3mm), use 2 threaded
screws and insert into the holes marked “B” in the diagram
shown below.
A
B
A
B
2) Connect the Ethernet cable (for power and network connection) to
the LAN port on the back of the AP.
3) To mount the AP onto the mounting bracket, insert the
mounting-bracket tabs into the slots on the back of the AP.
: If you are mounting the AP on a wall, you cannot use
the slots on the bottom narrow edge of the device. Instead, you must
use the slots on back of the AP.
Summary of Contents for WA2620-AGN
Page 24: ...2 10...
Page 44: ...A 14 6 7...
