4
WA2200 series quick start guide
This guide provides steps for basic indoor, desktop hardware installation for the WA2200
series access points. Further information, such as optional installation and configuration
procedures and technical specifications about connections and power is available in the
H3C WA2200 Series WLAN Access Point Installation Guide
.
WA2200 series comprises the following models of indoor and outdoor access points (ACs).
WA2210-AG (indoor)
WA2220-AG (indoor)
WA2210X-G (outdoor)
WA2220X-AG (outdoor)
Installation preparations
WARNING!
Installation and removal of the unit and its accessories must be carried out by qualified personnel.
Read all Safety Instructions supplied with your device before installation and operation.
Unpacking and inspection
Before unpacking the package, ensure that the package is not damaged and that it does
not show signs of water damage. While opening the package and removing the contents,
avoid using excessive force.
The accessories vary with the models. For the exact contents of the package, refer to the
packing list. If the contents do not match the packing list, contact your H3C representative.
If the package is found to be rusted or water soaked, stop unpacking and contact your
H3C representative immediately.
Installation tools
When installing the AP, you may need the tools listed in Table 1 Select the appropriate tools
according to your installation environment (indoor or outdoor).
Table 1
List of installation tools
Type of tool
Indoor installation
Outdoor installation
General
tools
1-meter-long ruler, marking pen, knife,
and percussion drill with matching drills
Digging tool, adjustable spanner,
and vices
Special tools
Cable stripper, crimping pliers, and
RJ-45 crimping pliers
Cable stripper, crimping pliers,
RJ-45 crimping pliers, waterproof
tape, and fiber fusion splicer
