background image

Command Manual – Getting Started 
H3C VG Series Voice Gateways 

Chapter 1  Fundamental Configuration Commands

 

1-9 

By viewing the system version, you can get information about the current software 

version, hardware configuration, starting time and so on .  

Example 

# Display system version. 

[VG] display version 

H3C Comware Software 

Comware software, Version 1.80, Feature 0019 

 Copyright(c) 2004-2006 Hangzhou Huawei-3Com Tech. Co., Ltd. All rights 

reserved. 

 

 Without the owner's prior written consent, no decompiling 

 or reverse-engineering shall be allowed. 

 

 H3C VG 10-41 uptime is 0 day(s) 0 hour(s) 2 minute(s) 11 second(s) 

 

 System returned to ROM by power-on. 

 

 H3C VG 10-41 with 1 MPC 852 Processor 

 Voice Gateway serial number is 00E0FC1213147654 

 32M     bytes SDRAM 

 8192K   bytes Flash Memory 

 0K      bytes NVRAM 

 Config Register points to FLASH 

 

  Hardware Version is MTR 2.0 

  CPLD Version is CPLD 1.0 

  Bootrom Version is 1.04 

  [WAN   ] Eth      Hardware Version is 2.0, Driver Version is 1.0, 

                    Cpld Version is 1.0 

  [LAN   ] Eth      Hardware Version is 2.0, Driver Version is 1.0, 

                    Cpld Version is 1.0 

  [PHONE0] FXS      Hardware Version is 2.0, Driver Version is 1.0, 

                    Cpld Version is 1.0 

  [PHONE1] FXS      Hardware Version is 2.0, Driver Version is 1.0, 

                    Cpld Version is 1.0 

  [PHONE2] FXS      Hardware Version is 2.0, Driver Version is 1.0, 

                    Cpld Version is 1.0 

  [PHONE3] FXS      Hardware Version is 2.0, Driver Version is 1.0, 

                    Cpld Version is 1.0 

  [LINE  ] FXO      Hardware Version is 2.0, Driver Version is 1.0, 

                    Cpld Version is 1.0 

Summary of Contents for VG Series

























Reviews: