H3C VG 31-08 Installation Manual Download Page 59

Page: 59 / 72

Installation Manual
H3C VG 31-08 Voice Gateway

Chapter 5 Software Maintenance

5-14

Press <Enter>. The following message appears:

For each of the following questions, you can press <Return>

to select the value shown in braces, or you can Enter a new

value.

Note:

For the displayed messages that ask for your interaction, you can

press <Enter> to adopt the default value in the brackets ([]), or input

the desired value.

Step 2: Configure TFTP parameters.

NETWORK INTERFACE PARAMETERS:

Configure the network interface parameters for the VG 31-08,

including the port to be used, its IP address and the subnet mask.

Do you want a LAN interface? [N] y

This board's LAN IP address? [169.254.10.10]10.110.10.10

Subnet mask for LAN (0 for none)? [255.255.0.0]

TFTP SERVER PARAMETERS:

Configure the TFTP Server parameters, including the IP address

of the Ethernet interface on the PC, the filename of the application

program, and CPU delay.

IP address of the TFTP server?

[169.254.75.166]10.110.10.13

What is the name of the file to be loaded and started?

[VG20X.BIN]

Summary of Contents for VG 31-08









































































Search results

Summary of Contents for VG 31-08

Reviews:

Related manuals for VG 31-08

Brands by name

Popular brands

H3C VG 31-08, Installation Manual

Search results

Summary of Contents for VG 31-08

Reviews:

Related manuals for VG 31-08

Brands by name

Popular brands