H3C UniServer R6700 G3, User Manual

Page: 117 / 151

10-8
Server model
Front drive
configuration
Storage controller Riser card
24SFF
(8 front SFF SAS/SATA
16 front SFF
UniBay drives)
•
3 × standard storage
controllers with 8 internal SAS
ports
•
1 × standard storage
controller with 16 internal
SAS ports + 1 × standard
storage controllers with 8
internal SAS ports
2 ×
RC-8*NVME-1*FHHL-
G3 riser card for the
UniBay drives
NOTE:
•
A UniBay drive slot supports both SAS/SATA drives and NVMe drives.
•
To install 2SFF drives at the server rear, connect the rear drives to the embedded RSTe RAID
controller and connect the front drives to the standard controllers as described in Table 10-4 .
Table 10-5 Drive population and drive numbering schemes
Drive configuration Drive numbering
8SFF front drives See Figure 10-3 .
16SFF front drives See Figure 10-4 .
24SFF front drives See Figure 10-5 .
2SFF rear drives See Figure 10-6 .
NOTE:
For the location of the drive cage bays on the front panel of the server, see " Front panel view ."
Figure 10-3 Drive numbering for 8SFF drive configurations
Figure 10-4 Drive numbering for 16SFF drive configurations