16
Figure 13 Drive numbering for front 4LFF drive configurations
Figure 14 Drive numbering for front 32E1.S drive configurations
Figure 15 Drive numbering for rear 2SFF drive configurations
Drive LEDs
The server supports SAS, SATA, and NVMe drives. You can use the LEDs on a drive to identify its
status.
and
shows the location of the LEDs on a drive.
Figure 16 Drive LEDs
(1) Fault/UID LED
(2) Present/Active LED
Figure 17 E1.S drive LEDs
(1) Fault/UID LED
(2) Present/Active LED
To identify the status of a SAS or SATA drive, use
. To identify the status of an NVMe drive,
use
