17
6.
Secure the Ethernet cable. For information about how to secure cables, see "
Connecting the power cord
Guidelines
WARNING!
To avoid damage to the equipment or even bodily injury, use the power cord that ships with the
server.
Before connecting the power cord, make sure the server and components are installed correctly.
Procedure
1.
Insert the power cord plug into the power receptacle of a power supply at the rear panel, as
shown in
Figure 8 Connecting the power cord
2.
Connect the other end of the power cord to the power source, for example, the power strip on
the rack.
3.
Secure the power cord to avoid unexpected disconnection of the power cord.
Multiple types of wire fasteners can be used for securing the power cord. In this procedure, a
cable clamp is used.
a.
If the cable clamp is positioned too near the power cord that it blocks the power cord plug
connection, press down the tab on the cable mount and slide the clip backward.
