H3C UniServer R2700 G3, User Manual

Page: 134 / 226

7-51
Figure 7-62 Removing the front I/O module that holds the front I/O component
6.
Remove the front I/O component from the front I/O module, as shown in Figure 7-63 .
Figure 7-63 Removing the front I/O component from the front I/O module
7.
Install a new front I/O component:
a.
Install the I/O component in the front I/O module.
b.
Install the front I/O module to the server.
c.
Connect the front I/O component cable assembly to the front I/O component connector on
the system board. For more information, see "
Connecting the front I/O component cable
assembly ."
8.
Install the access panel. For more information, see " Installing the access panel ."
9.
Rack-mount the server. For more information, see " Rack-mounting the server ."
10.
Connect the power cord. For more information, see " Connecting the power cord ."
11.
Power on the server. For more information, see " Powering on the server ."