7-2
Figure 7-1 Removing the access panel
Installing the access panel
1.
Use a T15 Torx screwdriver to unlock the locking lever.
2.
Press the latch on the locking lever, pull the lever upward, and then release the latch.
3.
Install the access panel, as shown in
a.
Place the access panel on top of the server chassis, with the guide pin in the chassis
aligned with the pin hole in the locking lever area.
b.
Close the locking lever. The access panel will automatically slide toward the server front to
secure itself into place.
c.
(Optional.) Lock the locking lever. Use a T15 Torx screwdriver to turn the screw on the
lever 90 degree clockwise, as shown by callout 3.
Figure 7-2 Installing the access panel
4.
Rack-mount the server. For more information, see "
5.
