7-28
Figure 7-32 Removing the processor retaining bracket
7.
Separate the processor from the retaining bracket, as shown in
.
Figure 7-33 Separating the processor from the retaining bracket
Installing a processor
1.
Install the processor onto the retaining bracket. For more information, see "
."
2.
Smear thermal grease onto the processor:
a.
Clean the processor and heatsink with isopropanol wipes. Allow the isopropanol to
evaporate before you continue with the subsequent steps.
b.
Use the thermal grease injector to inject 0.6 ml of thermal grease to the five dots on the
processor, 0.12 ml for each dot, as shown in
.
