H3C UniServer BT716F, User Manual

Page: 20 / 44

2-11
As shown in Figure 2-8 , when the half-width single-height blade server is installed in the front slots
of the chassis, the external interfaces of the straight-through module have one-to-one
correspondence with the 16 blade servers. That is, port 1 is connected to blade server 1, and users
can access blade server 1 through port 1; port 2 is connected to blade server 2, and users can
access blade server 2 through port 2; and so on.
Note
•
For the correspondence between the straight-through modules connected to different slots and the
blade server Mezz NICs, see 2.5.1 Connections Between Straight-Through Modules and Mezz
NICs .
•
For details about blade server Mezz NIC ports that are connected to straight-through modules,
contact Technical Support.
Figure 2-8 Internal connections between external interfaces of straight-through module and
half-width single-height blade server
2. Correspondence between external interfaces of straight-through module and full-width
single-height blade server (supports up to 6 Mezz NICs)
Figure 2-3 shows the 16 FC interfaces on the straight-through module panel, which are numbered
from 1 to 16. Figure 2-9 shows the slots for the 8 full-width single-height blade servers installed in
the front slots of the blade server chassis. They are numbered 1, 3, 5, 7, 9, 11, 13, and 15.
ICM Front
Port 1
Port 2
Port 3
……
Port 4
Port 13
Port 14
Port 15
Port 16
Blade1
Blade3
Blade2
Blade4
Blade13
Blade15
Blade14
Blade16
……
Mid-plane
Enclosure