14
Table 5 LED description
LED Status
Description
Power LED
Yellow
Steady on
The AP is initializing, or an initialization
exception has occurred.
Flashing at 1 Hz
No radios have been detected.
Flashing at 2 Hz
The Ethernet ports are down or no mesh
links are established.
Green
Flashing at 2 Hz
The AP is upgrading the image.
Flashing at 0.5
Hz
The AP has started up but has not
associated with any AC.
Steady on
The AP has registered on an AC, but does
not have any associated clients.
Off
No power is present or the LED has been
turned off from the CLI.
Radio LED
Yellow
Flashing at 1 Hz
Only the 5G radio has associated clients.
Green
Flashing at 1 Hz
Only the 2.4G radio has associated clients.
Alternating between
yellow and green
Flashing at 1 Hz
Both the 2.4G and 5G radios have
associated clients.
Off
No clients are associated with the AP or the
LED has been turned off from the CLI.
PSE port LED
Yellow Steady
on
The PSE port is supplying power
incorrectly.
Green
Steady on
The PSE port is supplying power correctly.
Off
The PSE is not supplying power or the LED
has been turned off from the CLI.
100/1000Base-T
autosensing
Ethernet port LED
Yellow
Steady on
The port can operate at 100/10 Mbps after
autonegotiation.
Flashing
The port is operating at 100/10 Mbps.
Green
Steady on
The port can operate at 1000 Mbps after
autonegotiation.
Flashing
The port is operating at 1000 Mbps.
Off
No link is present or the LED has been
turned off from the CLI.
1000Base-X SFP
port LED
Yellow
Steady on
The port can operate at 100/10 Mbps after
autonegotiation.
Flashing
The port is operating at 100/10 Mbps.
Green
Steady on
The port can operate at 1000 Mbps after
autonegotiation.
Flashing
The port is operating at 1000 Mbps.
Off
No link is present or the LED has been
turned off from the CLI.
