7
Push the power module slowly into the slot along the guide rails.
将电源模块沿着插槽导轨，水平缓慢的推进电源插槽。
Connecting an AC power cord
连接交流电源线
Connecting the power cord for a PSR1200-D DC power module
连接
PSR1200-D
直流电源模块电源线
To install two power modules for the router, make sure they are the same model.
设备安装多电源模块时，请保证两块电源模块的型号相同。
!
2
1
4
1
2
3
Installing power modules
The router supports the PSR1200-A and PSR1200-D power modules.
设备支持型号
PSR1200-A
、
PSR1200-D
的电源模块。
Install a minimum of one power module for the router. To ensure good ventilation and
prevent dust from entering the chassis, install a filler panel in each unused power
module slot.
为保证设备的正常运行，请至少安装一块电源模块，没有安装电源模块的
槽位，请及时安装假面板，以保证设备的良好通风散热并防止灰尘进入设备。
Copyright © 2022, New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
Copyright © 2022
新华三技术有限公司 版权所有，保留一切权利
本文档中的信息如有更改，恕不另行通知
如需了解产品及安装方面的更多信息，请登录
H3C
网站
www.h3c.com
This quick start is specific to the following device models:
本手册适用的设备型号如下：
List of devices
Product code
Model (marked on the front panel)
RT-SR6616-H3
H3C SR6616
Connecting power cords
Before connecting a power cord, make sure the router is reliably grounded.
在连接电源线前，需保证设备已正确接地。
To avoid bodily injury, connect the power cord first to the router and then to the power
source.
在连接电源线时，先完成电源线与设备侧的连接，再进行电源线与机房
供电系统的连接，以免造成人身伤害。
