Command Manual – User Access
H3C SecPath Series Security Products
Chapter 3 PPPoE Client Configuration Commands
3-8
configured on these physical interfaces, so as to use the user name of a dial-in party to
locate the corresponding dialer interface for the call. In this mode, physical interfaces
and dialer interfaces are dynamically bound. Furthermore, a dialer interface can only
call a destination address, which will be specified in the
dialer number
command.
The physical interfaces in Circular DCC and Resource-Shared DCC do not use
individual network addresses. Instead, they use the addresses of the dialer interfaces.
Example
# Define the dialer 1 interface.
[H3C] interface dialer1
3.1.9 pppoe-client
Syntax
pppoe-client dial-bundle-number
number
[
no-hostuniq
] [
idle-timeout
seconds
[
queue-length
packets
] ]
undo pppoe-client dial-bundle-number
number
View
Ethernet interface view, virtual Ethernet interface view
Parameter
dial-bundle-number
number
: Dialer Bundle number corresponding to PPPoE session,
and its value ranges from 1 to 255.The parameter
number
can be used to identify a
PPPoE session, or as a PPPoE session.
no-hostuniq
: The call originated from PPPoE client does not carry the Host-Uniq field.
idle-timeout
seconds
: Idle time of PPPoE session in seconds, and its value ranges
from 1 to 65535. If the parameter is not configured, PPPoE session will work in
permanent online mode. Otherwise, it will works in packet trigger mode.
queue-length
packets
: packet number cached in the system before PPPoE session is
established, its value ranges from 1 to 100.Only after
idle-timeout
is configured will the
parameter be enabled. By default,
packets
is 10.
Description
Use the
pppoe-client
command to establish a PPPoE session and specify the Dialer
Bundle corresponding to the session.
Use the
undo pppoe-client
command to delete a PPPoE session.
By default, no PPPoE session is configured.
Multiple PPPoE sessions can be configured at one Ethernet interface, i.e. one Ethernet
interface might simultaneously belong to multiple Dialer Bundles. However, one Dialer
