Command Manual – User Access
H3C SecPath Series Security Products
Chapter 3 PPPoE Client Configuration Commands
3-6
View
Any view
Parameter
summary
: Displays the summary of PPPoE session.
packet
: Displays the statistics of PPPoE session data packet.
dial-bundle-number
number
: Displays the statistics of the specified PPPoE session. If
PPPoE session is not specified, the system will display the statistics of all PPPoE
sessions.
Description
The command
display pppoe-client session
is used to display the status and
statistics of PPPoE session.
Example
# Display the summary of PPPoE session.
[H3C] display pppoe-client session summary
There is 2 session in total:
ID Bundle Dialer Intf Client-MAC Server-MAC State
1 1 1 Eth0 00e0fc0254f3 00049a23b050 PPPUP
2 2 2 Eth0 00e0fc0254f3 00049a23b050 PPPUP
For more details of the display information, see the following table.
Table 3-1
Explanation of display pppoe-client session summary
Field
Description
ID
Session ID, PPPoE session ID
Server-MAC Server
MAC, server MAC address
Client-MAC
Client MAC, client MAC address
Dialer Corresponding
Dialer
interface of PPPoE session
Bundle
Dialer Bundle containing PPPoE session
Intf
Ethernet interface containing PPPoE session
State
State of PPPoE session
# Display the statistics of PPPoE session data packet
<H3C> display pppoe-client session packet
PPPoE Client Session:
ID InP InO InD OutP OutO OutD
=============================================================
