13
Figure2-4 Attaching the mounting brackets and chassis rails to the firewall
7.
One person supports the bottom of the firewall, align the chassis rails with the slide rails, and
slide the slide rails into the chassis rails until the mounting brackets are flush with the front rack
posts.
8.
Fasten the M6 rack screws with a Phillips screwdriver to secure the mounting brackets to the
front rack posts.
Figure2-5 Mounting the firewall to the rack
Installing a power module
CAUTION:
•
Make sure the power module is powered off and the device is correctly grounded before
installation.
•
Install a filler panel over an empty power module slot to prevent dust and ensure good ventilation
in the chassis.
•
Do not install both AC and DC power modules on the same device.
