5-29
Figure5-2 Rear panel
(1) Fiber management Ethernet port
(2) Grounding point
(3) Copper management Ethernet port
(4) Serial console port
(5) Mini USB console port
(6) USB port
(7) Serial label pull tab
(8) Power module 1
(9) Power module 2
(10) Power module 3
(11) Power module 4
(12) Fan tray 5
(13) Fan tray 4
(14) Fan tray 3
(15) Fan tray 2
(16) System status LED (SYS)
(17) Copper management Ethernet port LED (LINK/ACT)
(18) Fan tray 1
(19) Fiber management Ethernet port LED (LINK/ACT)
The ESN serial number and MAC address of the switch can be found on the serial label pull tab.
The switch comes with power module slots PWR1 and PWR2 empty and power module slots PWR3
and PWR4 each installed with a filler panel. You can install two to four power modules for the switch
as needed. In
, PSR1600B-12A-B power modules are installed in the four power module
slots.
The switch comes with the five fan tray slots empty. You must install five fan trays of the same model
for the switch. In
, FAN-80B-1-B fan trays are installed in the five fan tray slots.
The switch comes with the eight interface module slots each installed with a filler panel. You can
install one to eight interface modules for the switch as needed. In
, LSWM116H interface
modules are installed in the eight interface module slots.
Technical specifications
Table5-1 Technical specifications
Item
Specification
Dimensions (H × W × D)
130.5 × 440 × 760 mm (5.14 × 17.32 × 29.92 in)
Weight (fully configured with fan trays
and power modules, excluding
≤ 45 kg (99.21 lb)
4
7
8
10
9
11
6
5
15
13
14
12
2
3
1
16
19
17
18
