2-8
Figure2-6 Bottom support rails
(1) Installation hole
(2) Guide rail
(3) Front end mark (FRONT)
Attaching the mounting brackets to the chassis
As shown in
, the switch provides one installation position for mounting brackets.
Figure2-7 Installation position for mounting brackets
(1) Installation position for mounting brackets
To attach the mounting brackets to the chassis:
1.
Place the wide side of a mounting bracket against its installation position on the chassis. Align
the mounting holes in the mounting bracket with the screw holes in the chassis.
2.
Use the provided M4 screws to attach the mounting bracket to the chassis (recommended
torque: 12 kgf-cm).
2
1
3
1
