Installation Manual
H3C S9500 Series Routing Switches
Appendix B Installation of B68 Cabinet
B-25
B.3.5 Installing Supporting Accessories of Raised Floor
The supporting accessories of raised floor are to support the raised floor around the
cabinet.
I. Installing angle plate for the floor bracket and angle supports for slide rails
Fix the angle plate and angle supports with bolt, flat washer and spring washer
according to installation location, shown in Figure B-27.
Caution:
Make sure to differentiate the angle supports for the left slide rail and the right slide rail
before installation.
(1) Flat washer
Φ
12 (2)
Spring
washer
Φ
12
(3) Bolt M12X20
(4) T nut
(5) Angle plate for floor bracket
(6) Angle support of left slide rail
(7) Angle support of right slide rail
Figure B-27
Installation of fixing angle plates for floor bracket and angle supports for
left and right slide rails
II. Installing supporting angle plate of raised floor
Fix the front and side floor brackets on the angle plates and the angle supports of left
and right slide rails with the bolt M12 X 35, flat washer and spring washer, as shown in
Figure B-28.
