100
Figure 55
Removing the mounting brackets from the chassis
3.
Put the mounting brackets into the box.
Removing the cable management bracket
1.
Prepare the packing box of the cable management bracket. Make sure the box is clean, dry, and
not damaged.
2.
Use a screwdriver to loosen the screws that attach the cable management bracket to the chassis,
and then remove the cable management bracket.
3.
Put the cable management bracket into the box.
Figure 56
Removing the cable management bracket from the chassis
Repackaging the switch chassis
1.
As shown in
, align the screw holes on the two sides of the chassis bottom to the L-type
brackets on the pallet base of the wooden carton.
Summary of Contents for S7508E-X
Page 8: ...iv Index 102...
