4-3
•
Bits per second
—9,600.
•
Data bits
—8.
•
Stop bits
—1.
•
Parity
—None.
•
Flow control
—None.
Powering on the switch
Before powering on the switch, verify that the following conditions are met:
•
The switch has been steadily mounted.
•
All the cards have been correctly installed.
•
All the unused slots have been installed with filler panels.
•
All the network cables, fibers, power cords, and grounding cables have been correctly
connected.
•
The voltage of power supply can meet the requirements of the switch.
•
The console cable has been correctly connected. The configuration terminal has been started,
and the terminal parameters have been configured.
To power on the switch:
Turn on the power supply and power modules of the switch to power on the switch.
Command output varies by software version. The following is a sample output you can see on the
terminal:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
RAM test successful.
Press Ctrl+T to start five-step full RAM test...
Press Ctrl+Y to start nine-step full RAM test...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing...........................Done.
****************************************************************************
* *
* BootWare, Version 1.00 *
* *
****************************************************************************
Compiled Date : Jul 26 2017
CPU Type : loongson-2h
CPU Clock Speed : 800MHz
Memory Type : DDR3 SDRAM
Memory Size : 2048MB
Memory Speed : 333MHz
BootWare Size : 832KB
Flash Size : 16MB
CPLD Version : 001
PCB Version : Ver.A
BootWare Validating...