H3C S7500X-G Series, Installation Manual, Page: 23 / 79

2-7
Figure 2-7 Installing cage nuts (S7506X-G switch)
(1) Cage nuts
NOTE:
When preparing for installation, make sure the total height of the switches to be installed does not
exceed the height of the rack.
Attaching accessories to the chassis
Installing mounting brackets and cable management bracket
Before installing the switch in the rack, attach the mounting brackets and cable management bracket
(shipped with the chassis) to the switch. The mounting brackets are used for attaching the chassis to
the rack, and the cable management bracket is used for cabling the switch.
To attach the mounting brackets and cable management bracket to the switch:
1. Attach the cable management bracket to the left mounting bracket, as shown in Figure 2-9 .
1
1
1
1
1