manualshive.com logo in svg

H3C S7500E-XS Series, Installation Manual, Page: 5 / 64

Share
Download
H3C S7500E-XS Series Installation Manual Download Page 5

About the H3C S7500E-XS documentation set  

The H3C S7500E-XS documentation set includes: 

 

Category Documents 

Purposes 

Hardware specifications 
and installation 

Compliance and safety 
manual 

Provides regulatory information and the safety 
instructions that must be followed during installation. 

Installation quick start 

Provides basic installation instructions. 

Installation guide 

Provides a complete guide to hardware installation 
and hardware specifications. 

Interface cards user 
manual 

Describes the appearance, specifications, and 
installation and removal of interface cards. 

Software configuration 

Configuration guides 

Describe software features and configuration 
procedures. 

Command references 

Provide a quick reference to all available 
commands. 

 

Obtaining documentation 

Access the most up-to-date H3C product documentation on the World Wide Web 

at 

Click the following links to obtain different categories of product documentation: 

configuration and maintenance documentation. 

 

Technical support 

[email protected] 
http://www.h3c.com 

Documentation feedback 

You can e-mail your comments about product documentation to [email protected].  
We appreciate your comments. 

Summary of Contents for S7500E-XS Series

































































Reviews:

No comments