34
Figure2-48 Connecting the power cord for an
LSVM1AC300/LSVM1AC650/PSR250-12A/PSR250-12A1/PSR450-12A1 power module
(1) Releasable cable tie
(2) Tighten the releasable cable tie to secure the power cord to the handle of the power module
Connecting the power cord for an
LSVM1DC300/LSVM1DC650 power module
1.
Unpack the DC power cord, identify the plug for connecting to the power module, orient the plug
with the power receptacle on the power module, and insert the plug into the receptacle.
The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
2.
Use a cable tie to secure the power cord to the handle of the power module, as shown in
3.
Connect the other end of the power cord to a DC power source.
Figure2-49 Connecting the power cord for an LSVM1DC300 or LSVM1DC650 power module
If the provided DC power cord cannot meet your connection requirements, use the following table to
prepare a suitable copper cable as the DC power cord.
