36
[MCE-Vlan-interface20] ospfv3 30 area 0.0.0.0
[MCE-Vlan-interface20] quit
# On VR 2, assign IPv6 address 2002:1::2/64 to the interface connected to the MCE,
2012::2/64 to the interface connected to VPN 2, and 102.102.10.1 to Loopback 0. (Details not
shown.)
# Enable OSPFv3 process 30, and enable OSPFv3 on VLAN-interface 20 and VLAN-interface 21.
<VR2> system-view
[VR2] ospfv3 30
[MCE-ospfv3-30] router-id 102.102.10.1
[VR2-ospfv3-30] quit
[VR2] interface vlan-interface 20
[VR2-Vlan-interface20] ospfv3 30 area 0.0.0.0
[VR2-Vlan-interface20] quit
[VR2] interface vlan-interface 21
[VR2-Vlan-interface21] ospfv3 30 area 0.0.0.0
[VR2-Vlan-interface21] quit
# On the MCE, display the routing table of VPN instance
vpn1
.
[MCE] display ipv6 routing-table vpn-instance vpn1
Destinations : 6 Routes : 6
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 2001:1::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : Vlan10 Cost : 0
Destination: 2001:1::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 2012:1::/64 Protocol : Static
NextHop : 2001:1::2 Preference: 60
Interface : Vlan10 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
Destination: FF00::/8 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
# On the MCE, display the routing table of VPN instance
vpn2
.
[MCE] display ipv6 routing-table vpn-instance vpn2
Destinations : 6 Routes : 6
