32
Step Command
Remarks
2.
Configure an IPv6 static
route for an IPv6 VPN
instance.
ipv6 route-static
vpn-instance
s-vpn-instance-name
ipv6-address prefix-length
{
interface-type
interface-number
[
next-hop-address
] |
nexthop-address
[
public
] |
vpn-instance
d-vpn-instance-name nexthop-address
} [
permanent
]
[
preference
preference-value
] [
tag
tag-value
]
[
description
description-text
]
By default, no IPv6
static route is
configured.
3.
(Optional.) Configure
the default preference
for IPv6 static routes.
ipv6 route-static default-preference
default-preference-value
The default value is
60.
Configuring OSPFv3 between an MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
ospfv3
[
process-id
|
vpn-instance
vpn-instance-name
] *
N/A
3.
Set the router ID.
router-id
router-id
N/A
4.
Redistribute VPN routes.
import-route
protocol
[
process-id
|
all-processes
|
allow-ibgp
]
[
allow-direct
|
cost
cost
|
route-policy
route-policy-name
|
type
type
] *
By default, no routes are
redistributed into OSPFv3.
5.
(Optional.) Configure filtering
of advertised routes.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
bgp4+
|
direct
|
ospfv3
process-id
|
static
]
By default, redistributed routes are
not filtered.
6.
Return to system view.
quit
N/A
7.
Enter interface view.
interface
interface-type
interface-number
N/A
8.
Enable the OSPFv3 process
on the interface.
ospfv3
process-id
area
area-id
[
instance
instance-id
]
By default, OSPFv3 is disabled on
an interface.
Configuring EBGP between an MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Enter BGP-VPN instance view.
ip vpn-instance
vpn-instance-name
N/A
4.
Configure the PE as an EBGP
peer.
peer
{
group-name
|
ipv6-address
}
as-number
as-number
By default, no BGP peer is
configured.
5.
Enter BGP-VPN IPv6 unicast
address family view.
address-family ipv6
[
unicast
]
N/A
