248
Step Command
Remarks
2.
Enter Layer 2/Layer 3
Ethernet interface view,
management Ethernet
interface view, or Layer
2/Layer 3 aggregate
interface view.
interface
interface-type interface-number
N/A
3.
Configure the advertisable
TLVs (in Layer 2 Ethernet
interface view).
•
lldp tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ip-address
] }
|
dot1-tlv
{
all
|
port-vlan-id
|
link-aggregation
|
dcbx
|
protocol-vlan-id
[
vlan-id
] |
vlan-name
[
vlan-id
] |
management-vid
[
mvlan-id
] }
|
dot3-tlv
{
all
|
mac-physic
|
max-frame-size
|
power
} |
med-tlv
{
all
|
capability
|
inventory
|
network-policy
|
power-over-ethernet
|
location-id
{
civic-address
device-type country-code
{
ca-type ca-value
}&<1-10> |
elin-address
tel-number
} } }
•
lldp agent nearest-nontpmr tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ip-address
] } |
dot1-tlv
{
all
|
evb
|
port-vlan-id
|
link-aggregation
} }
•
lldp agent nearest-customer tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ip-address
] } |
dot1-tlv
{
all
|
port-vlan-id
|
link-aggregation
} }
By default:
•
Nearest bridge agents
can advertise all types
of LLDP TLVs except the
DCBX TLV, location
identification TLV, port
and protocol VLAN ID
TLVs, VLAN name
TLVs, and
management VLAN ID
TLVs.
•
Nearest non-TPMR
bridge agents can
advertise only the EVB
TLV.
•
Nearest customer
bridge agents can
advertise basic TLVs
and IEEE 802.1
organizationally
specific TLVs.
4.
Configure the advertisable
TLVs (in Layer 3 Ethernet
interface view or
management Ethernet
interface view).
•
lldp tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ip-address
] }
|
dot1-tlv
{
all
|
link-aggregation
} |
dot3-tlv
{
all
|
mac-physic
|
max-frame-size
|
power
} |
med-tlv
{
all
|
capability
|
inventory
|
power-over-ethernet
|
location-id
{
civic-address
device-type country-code
{
ca-type ca-value
}&<1-10> |
elin-address
tel-number
} } }
•
lldp agent
{
nearest-nontpmr
|
nearest-customer
}
tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ip-address
] } |
dot1-tlv
{
all
|
link-aggregation
} }
By default:
•
Nearest bridge agents
can advertise all types
of LLDP TLVs (only link
aggregation TLV in
802.1
organizationally
specific TLVs) except
network policy TLVs.
•
Nearest non-TPMR
bridge agents
advertise no TLVs.
•
Nearest customer
bridge agents can
advertise basic TLVs
and IEEE 802.1
organizationally
specific TLVs (only link
aggregation TLV).
