3-7
Table 3-3 display rip interface
command output description
Field
Description
Interface-name
Name of an interface running RIP
Address/Mask
IP address and mask of the interface
Version
RIP version running on the interface
MetricIn
Additional routing metric added to the incoming
routes
MetricIn route policy
Name of the route policy used to add the
additional routing metric for incoming routes. If no
route policy is referenced, the field displays
Not
designated
.
MetricOut
Additional routing metric added to outgoing routes
MetricOut route policy
Name of the route policy used to add the
additional routing metric for the outgoing routes. If
no route policy is referenced, the field displays
Not designated
.
Split-horizon
Indicates whether split-horizon is enabled (ON:
enabled, OFF: disabled)
Poison-reverse
Indicates whether poison-reverse is enabled (ON:
enabled, OFF: disabled)
Input/Output
Indicates if the interface is allowed to receive
(Input) or send (Output) RIP messages (on means
it is allowed, off means it is not allowed)
Current packets number/Maximum packets
number
Packets to be sent/Maximum packets that can be
sent on the interface
display rip route
Syntax
display rip process-id route
[
ip-address
{
mask
|
mask-length
} |
peer ip-address
|
statistics
]
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: RIP process ID, in the range of 1 to 65535.
